+8616622167725
gates@gemflexiblestone.com

ABOUT PRODUCT

Home ABOUT PRODUCT

ABOUT PRODUCT

Traditional MCM Large‑Size Artificial Stone Slabs with Micro‑Curvature

They are primarily composed of modified inorganic powders (clay / stone powder) and water‑based polymers. These products retain the three‑dimensional micro‑relief texture of natural stone, delivering a more substantial tactile feel. Its micro‑curvature property enables perfect fitting for large‑diameter cylinders or walls with gentle curvature. However, the slabs are prone to cracking if forced into small‑radius bending or 90‑degree folding. Featuring excellent freeze‑thaw resistance and UV resistance, this material serves as a premier alternative to conventional dry‑hang stone for building exterior wall renovation.

New‑type Artificial Stone Veneer with Non‑woven Fabric Base

This innovative product features ultra‑fine inorganic stone powder bonded onto a tough non‑woven fabric base. The incorporation of non‑woven fabric completely transforms the material’s physical and mechanical properties, delivering exceptional tear‑resistance and supreme flexibility. It can even be rolled up just like wallpaper, enabling seamless 90° right‑angle wrapping and cladding of special‑shaped components with small radii. This material greatly expands the application scope of stone materials in interior design, furniture veneering and ceiling decoration.

 


Comparison Criteria Traditional MCM Large‑Size Artificial Stone Slabs with Micro‑Curvature New‑type Artificial Stone Veneer with Non‑woven Fabric Base
Product Composition Modified Inorganic Stone Powder / Clay + Polymer Ultra‑fine Inorganic Stone Powder Coating + Non‑woven Fabric Backing
Standard Thickness Approx. 2.0 mm‑5.0 mm Approx. 1.0 mm‑2.0 mm (Ultra‑thin & Lightweight)
Flexibility Limit Only supports large‑radius slight‑arc bending; prone to fracture under excessive bending. Excellent flexibility, supports 90° right‑angle bending and small‑radius rolling.
Weight (kg/m²) Approx. 3.0‑6.0 kg/m² Approx. 1.0‑2.0 kg/m²
Visual and Tactile Properties Highly uneven surface, realistic three‑dimensional texture and solid feel of natural stone Relatively flat surface with delicate texture, lacking deep uneven relief.
Construction & Installation Requires special flexible tile adhesive, high requirement for substrate flatness Applicable with all‑purpose adhesive or backing glue; installation similar to wallpaper, easy to cut
Core Advantages Excellent weather resistance (suitable for outdoor use), high fire‑resistance rating, strong texture, lightweight for easy transportation and installation Good weather resistance (suitable for outdoor use), high fire‑resistance rating, eco‑friendly, unlimited shaping capability, tear‑resistant, shatter‑proof during handling, lightweight for easy transportation and installation, rich color options, applicable for other finishes such as furniture
Key Drawbacks Great limitation in shaping; cannot handle complex special‑shaped surfaces or 90° edge wrapping Texture similar to "stone‑look film"
Recommended Scenarios Building exterior walls, large‑area interior feature walls, large‑diameter column cladding Building exterior walls, interior landscape walls, custom‑made furniture, ceilings, complex irregular‑shaped spaces, bar counter edge cladding
Product Upgrades Iterated product of natural stone slabs and ceramic tiles Natural stone slabs, ceramic tiles, exterior wall coatings, exterior decorative paints, latex paints

 

PRODUCT PARAMETERS

 

Appearance :  No visible cracks, holes, glaze peeling, or obvious color difference on the product

Dimensional Tolerance (Sheet Material) :  Length/mm : +0.6 

                                                                      Width/mm :+0.9 

                                                                      Thickness/% :7.0 

                                                                      Edge Straightness/% :0

                                                                      Squareness/% :0

Areal Density Deviation/ (kg/m²) :  +0.1

Salt Spray Resistance (500h) :  No anomalies

Hazardous Substance Emission/[mg/(m²·h)] :  Total Volatile Organic Compounds(TVOC) :0.14 

                                                                              Formaldehyde :0.035

Water Vapor Permeability Density/[g/(m²·h)] :  1.46

Radioactive Nuclide Limit (Class A Decoration Material) :  Internal Irradiation Index IRa :0.41 

                                                                                                  External Irradiation Index Iγ :0.35

Flexibility (10mm-diameter mandrel) :  No cracks on the sample after the bending test with a 10mm-diameter mandrel

Water Absorption/% :  7

Flexibility (100mm-diameter cylinder) :  No cracks on the sample

Heating Dimensional Change Rate/% :  Longitudinal :0.15 

                                                                  Transverse :0.13

Temperature Resistance(10 cycles) :  Appearance : No abnormality in the sample

                                                              Flexibility : No cracks on the sample

Artificial Weathering Resistance (1600h) :  Appearance : No anomalies 

                                                                        Chalking/Grade : 0 

                                                                        Discoloration/Grade : 0 

                                                                        Flexibility : No cracks on the sample

Stain Resistance/Grade :  1

Chemical Corrosion Resistance :  No visible impairment after testing

Water Absorption/% :  7

Flexibility (100mm-diameter cylinder) :  No cracks on the sample

Heating Dimensional Change Rate/% :  Longitudinal : 0.15 

                                                                  Transverse : 0.13

Temperature Resistance(10 cycles) :  Appearance : No abnormality in the sample

                                                              Flexibility : No cracks on the sample

Artificial Weathering Resistance (1600h) :  Appearance : No anomalies 

                                                                        Chalking/Grade : 0 

                                                                        Discoloration/Grade : 0 

                                                                        Flexibility : No cracks on the sample

Stain Resistance/Grade :  1

Chemical Corrosion Resistance :  No visible impairment after testing

Flame Retardancy (Class B₁) : 

 

Fire Growth Rate Index FIGRA₀.₂MJ, W/s :  39

Total Heat Release in 600s THR₆₀₀s, MJ :  0.8

Lateral Flame Spread Length (LFS) :  Did not reach the long side edge of the sample

Flame Height (Edge ignition for 30s, mm) :  Complies with the requirements

Flame Height (Surface ignition for 30s, mm) :  Complies with the requirements

ping material igniting filter paper (Edge ignition for 30s) :  No burning drips within 60 seconds

Dripping material igniting filter paper (Surface ignition for 30s) :  No burning drips within 60 seconds

Smoke Production Rate Index SMOGRA, m²/S² :  s1 & s2 : 5

Total Smoke Production in 600s TSP₆₀₀s, ㎡ :  s1 & s2 : 39

Burning Drips/Particles :  Burning drips/particles occurred within 600 seconds, with a duration not exceeding 10 seconds

 

PRODUCT SPECIFICATIONS

 

 

INSTALLATION METHOD